Production Tube Bending for over 13 years!

Noble Industries has the equipment and knowledge to handle all your pipe and tube bending needs!  Bending pipe and tube can be simple or it can take to look of an artist and has a science of its own.  Bending quality is understood with our years of knowledge in bending tube and pipe products.  We can bend round, square rectangular or oval tube.  We specialize in precision tube bending and have minimal tube deformation.  Noble Industries has the ability to hold tight tolerances and can bend a wide selection of tube sizes.  When a tubular product is bent there is a chance of distortion if it is bent too fast or outside the tolerance of the material.  Other factors that must be considered include wall thickness and the degree of the bend.   Most of our large production tube bending is done with our CNC tube bending equipment.  We also have hand bending equipment that takes fixturing.  CNC bending produces tight & exact radius bends, large & small radius bends, and elliptical bends - all on the same part.  The most expensive part to some tube bending or pipe bending jobs could be the type of unique tooling or fixture to produce production parts and quality check the results.  Small production runs of 50 to 100 metal parts per run or production runs of 500,000 or 1,000 tubes, Noble Industries will meet your expectations. 

Our custom tube bending methods include ram bending, rolling, mandrel bending & rotary-draw bending.

Ram Tube Bending

Ram tube and pipe bending, is a method that forces a die against the section of tube or pipe where the bend is wanted. The die will push against the sidewall of the material and force it to bend, there are also opposing dies on the other sidewall. This will force the tube or pipe to conform to the contours of the die or tooling.

Roll Tube Bending

Roll tube and pipe bending draws the material through rollers to apply pressure to the tube as it goes through the rollers.  The positions of the rollers are progressively changed during operation until the desired radius is met. This method allows for a more gradual bending and less distortion on the tube or pipe being bent.

Mandrel Tube Bending

Mandrel tube bending is used when the bent pipe and tube must have none or very little deformation.  The pipe and tube is supported internally with a flexible mandrel which supports the material so that the bend occurs without interior collaspe or deforming.

Rotary-draw Tube Bending

A rotary draw bend is formed by drawing the part around the rotating bend former. The leading edge of the material to be bent is clamped to the bend forming die, while material rests between the forming die groove and the opposing force, commonly referred to as the counter bend or pressure die. The forming die rotates to desired degree of bend completing the process.

Noble Industries’ equipment list for tube and pipe bending

  • SOCO CNC Tube Bender – 360 degree rotating mandrel – 20’ length with maximum tube size of 2" round or 2" X 2" square.
  • Rondo (Three Roll) Tube & Angle rolls – 3” X 3”
  • 3/4" tube bender
  • Miscellaneous specialty dies

Products & Customer Profile

Noble Industries provides tube bending for the following:

  • Tube bending for automotive and transporation examples are grab handles.
  • Handles for carts for the medical, dental and industrial
  • Tube bending for exercise and fitness equipment
  • Point of Purchase displays for retail and hardware store
  • Construction projects

These are just a few of areas where our precision tube bending services are used. 

Choose Noble Industries for all your Metal Fabrication

Noble Industries is the best choice for all your fabrication needs.    Other metal fabrication companies strive to have craftsmen as skilled, equipment as state-of-the-art, and products produced as accurately as our company.  We get the entire job done right, and on time.

Contact a knowledgeable Noble Industries professional at 800-466-1926 and let us know how we can meet your design, manufacturing, coating, packing, and fulfillment needs.

Feature Service or Item

Superior Laser Cutting with 7 Lasers and Mazak FMS System

Noble Industries has the best laser cutting capabilities in the Midwest.  We have 5 Mazak 4000 watt laser cutting machines and 1 Mazak 2500 Watt laser & 1 Mazak 1000 laser.  We have the ability to do 3D cutting which can be used for countersinking holes or cutting tube.  Call us to today for laser cutting services.  We can also form your parts, provide welded assemblies and powder coat.  Noble Industries is your 1st choice in all things metal fabrication

learn more